other
Des produits
Réactif d'anticorps CD56 pour l'immunohistochimie

Réactif d'anticorps CD56 pour l'immunohistochimie

IHC Anticorps -- CD56


  • Contrôle positif:

    Appendix
  • Localisation cellulaire:

    Cytoplasm/cell membrane
  • Application:

    IHC-P
  • Anticorps secondaire:

    iVision™
  • Numéro de catalogue:

    AM0056
  • Espèce hôte:

    Mouse
  • Cloner:

    56C04
  • Spécification/ml:

    1、3、6、0.2(Concentrated)

Nom du produit

IHC Anticorps -- CD56


Spécification d'emballage

Code Cloner

Caractéristiques

AM0056 56C04

0,1 ml , 0,2 ml , 1 ml, 1,5 ml , 3 ml , 6 ml , 11 ml , 30 ml

AM0211 123C3

0,1 ml , 0,2 ml , 1 ml, 1,5 ml , 3 ml , 6 ml , 11 ml , 30 ml

AR0466 SD361

0,1 ml , 0,2 ml , 1 ml, 1,5 ml , 3 ml , 6 ml , 11 ml , 30 ml



Utilisation prévue

Pour la recherche uniquement. Le réactif anticorps CD56  est destiné à être utilisé pour identifier qualitativement CD56 par microscopie dans des coupes de tissu FFPE à l'aide d' un système de détection immunohistochimique . 


Principe _

CD56 est une seule glycoprotéine transmembranaire également connue sous le nom de N-CAM (Neural Cell Adhesion Molecule), Leu-19 ou NKH1. Dans les tissus normaux, l'anti-CD56 marque les neurones, la glie, les cellules de Schwann, les cellules NK (natural killer) et un sous-ensemble de cellules T. L'expression de CD56 peut être observée dans la plupart des néoplasmes à cellules NK, certains sous-types de lymphomes à cellules T et dans certains néoplasmes à plasmocytes. Ajouter l' anticorps primaire pour lier l' antigène sur les coupes de tissu , puis utiliser l'anticorps primaire de liaison de l'anticorps secondaire marqué HRP pour former le complexe anticorps secondaire - anticorps primaire - antigène .   When DAB chromogenic solution is added, HRP reacts with enzyme substrate to produce brown insoluble reaction product, which indirectly indicating the existence of antigen. 


Main components

Immunoglobulin, antibody diluent


Storage

Store at 2~8℃ for 18 months


Sample requirements

FFPE tissues are usually cut into sections as thin as 35μm with a microtome. These sections are then mounted onto glass slides that are coated with a tissue adhesive.


Protocol

1. Sample preparationDeparaffinize the slides in xylene , , Ⅲ for 5 minutesTransfer the slides once through 100%, 100%, 95%, 75% alcohols for 2 minutes respectively. Rinse slides with deionized water for 30 seconds.

2BlockingBlock endogenous peroxidase activity by incubating sections in 3% H2O2 solution at room temperature for 5 minutes to block endogenous peroxidase activity. Rinse the slides with deionized water for 30 seconds.

3Antigen retrievalHeat the EDTA Antigen retrieval buffer to 100. Then place the slides in the boiled buffer and continue to heat for 1520 min. Naturally cool down for 30 minutes. Rinse the sample with wash buffer.

4Primary antibody incubation: Drain the slides. Add primary antibody to tissue, incubate at room temperature for 30 minutes. (use antibody diluent or PBS as control). Wash the slides in PBST for 2 times, 5 minutes for each time. If the Primary antibody is concentrated, please dilute it to RTU(ready to use) according to the information on packing. 

5. Secondary antibody: Drain the slides. Add secondary antibody to tissue and incubate at room temperature for 20 minutes. Wash the slides in PBST for 2 times, 5 minutes for each time.

6. DABDrain the slides. Add DAB to the tissue and incubate at room temperature for 5 min. Rinse slides with deionized water.

7. Hematoxylin stainingDrain the slides. Add Hematoxylin to the tissue and incubate at room temperature for 5 minutes. Rinse slides with water. Use the acid solution for differentiation. Rinse slides with water.

8. DehydrateDehydrate the slides in 75%, 95%, 100% alcohols for 2 minutes. Dry the slides. Cover stained tissue with a coverslip using mounting medium.


Positive localization

1. Positive localization: membrane/cytoplasm.

2. Positive control: tonsil.


Precautions

1. Please read the instruction carefully and become familiar with all components of the kit prior to use, Strictly follow the instruction during operation.

2. DO NOT use the kit or any kit component after their.

3. Only trained professionals can use this kit. Please wear suitable lab coat and disposable gloves while handling the reagents.

4. Avoid contact of skin, eyes and mucous membranes with the chemicals.

5. DO NOT pipet by mouth.

6. Unused reagents, used kit and waste must be disposed according to local regulations.


Manufacturer

Company Name: Xiamen Talent Biomedical Technology Co.,Ltd

Address: No.3rd and 4th Floors , Building B10, No. 2068 Wengjiao Road West, BioMedical Park, Haicang District, Xiamen City, 36100 China

Tel: +86 592 6315755            

E-mail: tlsw@talentbiomedical.com                

Website: www.talentbiomedical.com


Symbols


# Laisser un message
Si vous êtes intéressé par nos produits et souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dans les plus brefs délais.
soumettre
#
Produits connexes
Voir plus

Laisser un message

Laisser un message
Si vous êtes intéressé par nos produits et souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dans les plus brefs délais.

Maison

Des produits

à propos

contact